angrycamel.com

There's a crack in the interweb

Archive for the ‘Acura’ Category

Acura Nav Unit Connector Source

I have been getting quite a few requests for the video harness connectors lately, so since I am not putting those harnesses together anymore, here are some links to the Tyco connectors. They are all part of the Mark II series. Plug MarkII : 175967-2 Cap MarkII : 175975-2 Metal Receptors : 175062-1

IEBus Controller is now on Sourceforge!

I have put the firmware on sourceforge.net under a project aptly named, IEBus Controller. Its getting to the point where I cannot work on it enough nor make enough progress to warrant keeping it all to myself. This doesn’t mean that I wont be working on the project, but it does mean that I welcome [...]

IEBus Controller Prototype Board

I just finished putting together the prototype board with the relays all working as they should be. Its a nasty looking beast of a prototype board but its working. I will be testing out the features of switching the video and disabling the IEBus signal from reaching the navigation computer while in “PC” mode tomorrow [...]

Powered PnP Install Diagram of Dom’s Video Converter

Here is a diagram that I put together to show how I used both the 20 pin and the 8 pin (C) connector together to form a completely plug and playable solution for Dom’s video converter box. (Both plug N play harnesses featured in this diagram are available for sale through this website. Email robbienewton [...]

16 Pin Connectors

Just thought it worth mentioning that if anyone needs any of the 16 pin connectors, I have a few available. It came to mind because a guy by the name of Garrick Lau sent me an email asking if I had any I could sell to him. He is working on completely replacing the navigation [...]

Video Switcher Circuit Works

With Dave’s help, the video switcher relay circuit is setup and working. I have not yet hooked up the actual wires that control the video toggling on Dom’s unit to the relay because its all pretty well installed in the car. I would do it tonight but its raining outside. For now (testing), the relay [...]

The IEBus Touchscreen Module Works!

Well its been a long time coming but when I finally received the ‘C’ connectors this week, I made a harness from them to gain access to the ACC for starters. I had installed the PC in the trunk already but was waiting on these parts so that I could hook up the ACC line [...]

Acura 8 pin navigation connector !!FOR SALE!!

I decided to go ahead and place the order for the C connectors. Due to a request I received in email, I will be selling both a harness that will terminate to a DB9 connector (just like the AH-20 harness) as well as a DIY kit that will come with a plug, cap, DB9 connector [...]

Acura C Connector 8 Pin PnP Harness

I may be able to get some of the C connectors (8 pin) for the back of the navigation unit. Would anyone be interested in a harness to gain access to the wires on that plug without damaging anything? So far I have had one person request it and have been thinking about doing it [...]